BARAN Microelectronic doesn’t exist anymore. Please contact AEWA Technologies GmbH for further support.
Web : http://www.aewa.de
E-Mail : info@aewa.de

Baran Microelectronic GmbH

  Top » Products » FPGA Boards » DMD4000
Products
  DLP® Technology
 
DMD4000
 DMD3000
 DLEBASE
  Processor Boards
 
BeagleFpga
  Optoelectronic Boards
 
Laser Diode Driver, 24 Channel
 High Power LED Driver Board
  FPGA Boards
 
V5ETHIO
 TINY-XLX
 USB2-XLX
 DFFO
  Customer Specific Boards
 
CSPM - CST Engraver Motherboard
 CR800 - Inkjet Head Board
 SC850FO - Inkjet Head Board
 SC850DRV - Inkjet Head Board
 WAXHEAD - Waxjet Head Board
 WAXCTRL - Waxjet Head Board
 WAX-LSB - Waxjet Control Board
 DLELT - DLE Control Board
 DLE-CCD - DLE Calibration Board
 USB2FO - USB to Fiber Optic Converter
  Software Products
 
BrUsb - USB Device Driver
DMD4000
DMD4000 is the head driver electronic for the third generation Flatbed Digital Light Engraver and Rotary Digital Light Engraver machines from CST GmbH. It receives data over fiber optic and sends it to the DMD device through the DDC4000 Digital Controller from Texas Instruments. The required DMD power and reset waveforms are generetad with the DAD2000 chip.

Applications
  • Printing, Screen printing
  • Spectroscopy
  • Security
  • Lighting
  • 3D Volumetric Display
  • High Performance Imaging
  • Medical
  • Machine Vision

Features
  • Supports 0.9" 1080P Type A LVDS DMD Discovery™, Digital Mirror Device, 1920x1080
  • Supports 0.7" Type A LVDS DMD Discovery™, Digital Mirror Device, 1024x768
  • Supports 0.55" Type A LVDS DMD Discovery™, Digital Mirror Device, 1024x768
  • Supports 0.55" Type X LVDS DMD Discovery™, Digital Mirror Device, 1024x768
  • Xilinx Virtex-5 SXT FPGA, XC5VSX35T-1FFG676C
    • XC5VSX50T FPGA and -2, -3 speed options are optional
    • Up to 52,224 logic cels
    • Up to 4,752 Kbit fast Block RAM
    • Up to 12 Digital Clock Managers (DCM)
    • Up to 6 PLLs
    • Up to 288 DSP slices
    • On-chip battery powered module for design encryption
    • Built-in solution for thermal management
  • Lattice ECP2 FPGA, LFE2-20SE-7FN672C
  • 2x DMD Discovery™ DAD2000, DMD Power and Reset Driver from Texas Instruments
  • DDC4000 Digital Controller from Texas Instruments
  • 64-bit DDR, 400 MHz LVDS data transfer to the DMD device
  • Up to 24,000 frames / second (1920 x 1080)
  • Up to 32,000 frames / second (1024 x 768)
  • 2x Plastic optical fiber receivers (Up to 70 Mbaud)
  • 1x Plastic optical fiber transmitters (Up to 70 Mbaud)
  • Serial EEPROM (1 Mbit)
  • 2x oscilator clocks, 60 Mhz and 50 Mhz LVDS(other frequencies are optional)
  • JTAG Programming Interface for FPGAs, Platform Flash chips
  • Platform Flash to store Virtex-5 FPGA configuration data
  • Serial EEPROM to store Lattice ECP2 FPGA configuration data
  • Extension and test header with 12x single and 4x differential signals
  • Self recharching battery for design encryption
  • Dip switch & LEDs
  • 14 layer board with:
    • 50 Ohm impedance for signle ended traces
    • 100 Ohm impedance for differential traces
    • Traces are routed with strict matched length rules
    • No layer changes for differential traces
  • 95 x 135 mm dimensions
  • Single 5V input power


DMD4000 side view
DMD4000 side view



DMD4000 with 1080P LVDS DMD
DMD4000 with 1080P LVDS DMD




DLP® is a registered trademark of Texas Instruments Inc.
DMD Discovery™ is a registered trademark of Texas Instruments Inc.

Copyright © 2004-2008 Baran Microelectronic GmbH